Skip to main content

SONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless Transmitter

SONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless Transmitter
SONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless TransmitterSONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless TransmitterSONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless Transmitter



Product Overview:
 
Home automation is "The Internet of Things".
It simply means the way all devices or appliances are networked together to provide users with a seamless control over their home equipment.
Sonoff is an affordable WiFi smart switch that provides users with smart home control.
It is a remote control power switch that can connect to a wide range of appliances.
Sonoff  WiFi electrical switch transmits data to a cloud platform through the WiFi Router,
which enables users to remotely control all the connected appliances, via the mobile application eWeLink.
 
SONOFF RF Specification:

Voltage range: 90-250v AC(50/60Hz)
Max current: 10A
Max Power: 2200 watts
Dimensions: 88*38*23mm (L*W*H)
Color: White
Humidity: 5%-90%RH, Non-condensing
Wireless Frequency ]: 2.4Ghz
Operating Temperature: 0℃-40℃(32°F-104°F)

86 Wall Panel Wireless Transmitter Specification:
 
Channel: 1 CH
Remote Control Distance:0-100m
Encode:  EV1527
Frequency:  433.92
Current: 20-25ma

Dimensions: 86*86mm
Power Supply: 12V 27A Battery (NOT included)
 
Product Advantage:
 
Supports 433MHz RF remote.
Supports status tracking: device status is timely provided to eWeLink.
Supports remote turn on or off connected appliance.
Supports max 8 enabled single/repeat/countdown timers.
Supports numerous WiFi smart switches one smart phone.
Works with Alexa.
Works with Nest.

Package included:

1 x SONOFF RF Switch Socket Module
1 x 86 Wall Panel Wireless Transmitter(Batteries not included)


















SONOFF® RF 7A 1500W AC90-250V DIY WIFI Wireless Switch Socket Module + 86 Wall Panel Wireless TransmitterSee detail


Popular posts from this blog

DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger

Get DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger Features:   1. Pure copper coil, high permeabillity, low loss, assuring fast charging. 2. Can charge the battery directly. 3. Charging current is around 5V 1A. 4. Can be directly connected to the phone's motherboard, the phone will display wireless charging. 5. Red is positive and gold is negative. The wire can be bent freely.   Specification:   Material: PCB Product Name: Wireless Charger Receiver Module Input Power: 5V 1A or 9V 0.5A Output: Power up to 5W Charging Efficiency: 75% Transmission distance: 2-8mm Charger Applicable Form: Wireless Charger Executive Standard: Qi Wireless Charging Standard Product Certification: CE/FCC/ROSH Board Size: 1.9 * 3.2cm / 0.7 * 1.3in Copper Coil Size: 4.1 * 2.9cm / 1.6 * 1.4in Cable Length: 5cm / 2.0in Weight: approx. 6g   Note:   Wireless charging = transmitter + receiver (both can be charged together) 1, there

10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino

Get 10pcs 4 Digit 7-Segment 0.56' LED Display Tube Decimal 7 Segments HT16K33 I2C Clock Double Dots Module For Arduino >>>Manual: Click here to open<<< Features:   - These 7-segment displays normally require 13 pins (5 characters and 8 total segments each). - Solves the annoyance of using 13 pins or a bunch of chips by having an I2C constant-current matrix controller sit neatly on the back of the PCB. - The controller chip takes care of everything, drawing all the LEDs in the background. - All you have to do is write data to it using the 2-pin I2C interface. - There are three address select pins so you can select one of 8 addresses to control up to 8 of these on a single 2-pin I2C bus (as well as whatever other I2C chips or sensors you like). - The driver chip can din the entire display from 1/16 brightness up to full brightness in 1/16th steps. - It can't din individual LEDs, only the entire display at once. - Size: 5.03 x 2.68 x 1.2 cm/2 x 1.1 x 0.5 inch  

8/10/12 Inch Ultralight Carbon Fiber Floating Lamp Magic Arm Underwater Photograph Diving Accessories

Get 8/10/12 Inch Ultralight Carbon Fiber Floating Lamp Magic Arm Underwater Photograph Diving Accessories Specification: Type:Underwater Photography floating arm Size: 8 10 12 inch Color: black Material : carbon fiber   Package included: 1 x Underwater Photography Floating Arm 8/10/12 Inch Ultralight Carbon Fiber Floating Lamp Magic Arm Underwater Photograph Diving Accessories See detail