High Power Quad-core Six Copper Tube Cooling Semiconductor Refrigeration Chip Cooler DIY Kit Pet Fish Tank Water Cooler With Power Supply

Buy High Power Quad-core Six Copper Tube Cooling Semiconductor Refrigeration Chip Cooler DIY Kit Pet Fish Tank Water Cooler With Power Supply

Description:

1. A 12706 power supply is 12V 6A, here is a 12V10A foot power supply

2. The red line of the fan and the cooling unit is the positive power supply V+, and the black line is the negative power supply V-, which cannot be cross-connected.

3. The cooling sheet can not be directly connected to 12V10A for more than 3s. This refrigerator has been tested before shipment, please feel free to assemble it directly.

4. It is normal to have a high temperature at the heating end, so it is necessary to use a fan or water to remove the heat difference UN in time to cool down the other side.
5. Power plug: EU plug

Package included:

1 x Quad-core Six Copper Tube Cooling Semiconductor Refrigeration Chip Cooler DIY Kit

High Power Quad-core Six Copper Tube Cooling Semiconductor Refrigeration Chip Cooler DIY Kit Pet Fish Tank Water Cooler With Power SupplyBuy Now

DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger

Get DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger Features: 1. Pure copper coil, high permeabillity, low loss, assuring fast charging. 2. Can charge the battery directly. 3. Charging current is around 5V 1A. 4. Can be directly connected to the phone's motherboard, the phone will display wireless charging. 5. Red is positive and gold is negative. The wire can be bent freely. Specification: Material: PCB Product Name: Wireless Charger Receiver Module Input Power: 5V 1A or 9V 0.5A Output: Power up to 5W Charging Efficiency: 75% Transmission distance: 2-8mm Charger Applicable Form: Wireless Charger Executive Standard: Qi Wireless Charging Standard Product Certification: CE/FCC/ROSH Board Size: 1.9 * 3.2cm / 0.7 * 1.3in Copper Coil Size: 4.1 * 2.9cm / 1.6 * 1.4in Cable Length: 5cm / 2.0in Weight: approx. 6g Note: Wireless charging = transmitter + receiver (both can be charged together) 1, there...

24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT

Buy 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Instruction: If music is the food of love, play on. But make sure you use this super little DAC Module to get the best out of your Raspberry audio! The DAC Module provides a super affordable high-quality DAC for the Raspberry. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry's I2S interface on the 2x20 pin GPIO header. Since it's digital audio, it sounds really good, much better than the onboard analog audio. The 3.5mm stereo jack comes soldered onto the board already. Features: 24-bit audio at 192KHz Line out stereo jack pHAT format board Uses the PCM5102A DAC to work with the Raspberry I2S interface Package includes: 1 x DAC digital to analog converter 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Buy Now

433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver

Get 433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver Feature: Remote Control Distance: 100 meter(open/ideal) in theory, 10%-50% in reality(In open environment) Encode: Fixed code, soldering Frequency: 433mHZ Channel: 4 CH Power Supply: DC 12V Relay: DC 12V Quiescent Current: 8mA Work Voltage Range of Relay: AC 110-240V or DC 0-28V Sensitivity:-105 dBm Operating Temperature: -40℃~80℃ Receiver Size: 68x47x17mm Control Mode: 1. Toggle/Self-Lock: Press->On; Press again->Off press one button for one time is working/ON .press the same button again is stop/OFF . (1 channel switch(receiver) need 1 button remote control (transmitter). 2. Latched/Inter-Lock: Press->On; Press other button->Off press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). 3. Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen you...

Anwen Tanner

Search This Blog