Skip to main content

Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet

Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet
Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink FaucetXiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink FaucetXiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet


Get Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet


null

Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink Faucet

 

Features:

1. Upgrade double sensor for faucet, two sets of sensing areas, two water modes, 0.25 second fast induction.

2. Drains water inductively by IR, reducing touch pollution.

3. Bottom sensor for short-term water needs - When the sensor enters the bottom sensing area (within a limited distance of 10 cm), the water began to flow out. When the sensor leaves, Water stops flowing out.

4. Side sensor meets water storage requirements - When the sensor enters the side sensing area (within a limited distance of 5 cm), the water began to flow out. The current lasts for three minutes, and the water remains flow out even if the sensory object leaves. If the sensor enters the side sensing area again during the water flow process, the water can be stopped at any time.

5. First-class water efficiency, energy saving and environmental protection.

6. Simple design style, adapt to various home styles.

7. 6 sets of adapters, meet your different needs.
 

Advantages:

- Inductively drains water.

- Water saving.

- Convenient to disassemble and assemble.

- Super long battery endurance.

- Water overflow protection.
- IPX6 Waterproof.

 

Specification:

Brand: ZAJIA (Xiaomi Ecological Chain)
Weight: 105g

Size: 60x34x49mm

Standby Energy Consumption: ≤0.2mW

Working Water Pressure: 0.05-0.8MPa

Sensing Range: Side Sensor 0-5cm/Bottom Sensor 0-10cm

Water Efficiency: First Level

Protection Grade: IPX6

Charging Method: USB

 

Package Included:

1 x Infrared Induction Water Saving Device For Faucet

1 x Installation Wrench 

3 x Seal Rings 

6 x Adapters

1 x Instructions

 






Xiaomi ZAJIA Automatic Sense Infrared Induction Water Saving Device For Kitchen Bathroom Sink FaucetSee detail


Popular posts from this blog

DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger

Get DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger Features:   1. Pure copper coil, high permeabillity, low loss, assuring fast charging. 2. Can charge the battery directly. 3. Charging current is around 5V 1A. 4. Can be directly connected to the phone's motherboard, the phone will display wireless charging. 5. Red is positive and gold is negative. The wire can be bent freely.   Specification:   Material: PCB Product Name: Wireless Charger Receiver Module Input Power: 5V 1A or 9V 0.5A Output: Power up to 5W Charging Efficiency: 75% Transmission distance: 2-8mm Charger Applicable Form: Wireless Charger Executive Standard: Qi Wireless Charging Standard Product Certification: CE/FCC/ROSH Board Size: 1.9 * 3.2cm / 0.7 * 1.3in Copper Coil Size: 4.1 * 2.9cm / 1.6 * 1.4in Cable Length: 5cm / 2.0in Weight: approx. 6g   Note:   Wireless charging = transmitter + receiver (both can be charged together) 1, there...
Read more

433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver

Get 433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver Feature:   Remote Control Distance: 100 meter(open/ideal) in theory, 10%-50% in reality(In open environment) Encode: Fixed code, soldering Frequency: 433mHZ Channel: 4 CH Power Supply: DC 12V Relay: DC 12V Quiescent Current: 8mA Work Voltage Range of Relay: AC 110-240V or DC 0-28V Sensitivity:-105 dBm Operating Temperature: -40℃~80℃ Receiver Size: 68x47x17mm   Control Mode:   1. Toggle/Self-Lock: Press->On; Press again->Off press one button for one time is working/ON .press the same button again is stop/OFF . (1 channel switch(receiver) need 1 button remote control (transmitter). 2. Latched/Inter-Lock: Press->On; Press other button->Off press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). 3. Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen you...
Read more

24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT

Buy 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Instruction: If music is the food of love, play on. But make sure you use this super little DAC Module to get the best out of your Raspberry audio! The DAC Module provides a super affordable high-quality DAC for the Raspberry. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry's I2S interface on the 2x20 pin GPIO header. Since it's digital audio, it sounds really good, much better than the onboard analog audio. The 3.5mm stereo jack comes soldered onto the board already. Features: 24-bit audio at 192KHz Line out stereo jack pHAT format board Uses the PCM5102A DAC to work with the Raspberry I2S interface Package includes: 1 x DAC digital to analog converter 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Buy Now
Read more