16 Channel Professional DJ Studio Live Studio Audio Mixer Sound Console

Buy 16 Channel Professional DJ Studio Live Studio Audio Mixer Sound Console

Features
- Fits bluetooth function
- USB plug and play
- Lightweight and portable
- Each mono with 3-band equalization
- 6 kinds of music modes

Specifications
Maximum input level of the microphone: +24dBu
Line maximum input level: +24dBu
Maximum output level: XLR card + 26dBu
Main level meter: 10-segment LED, -24dB to CLIP
Frequency response: 20Hz-30Khz±0.5dB
Maximum power input power: 15W
Total chopping distortion (RHD+N): <0.01%
Crosstalk (1kHz): fader off >85dB channel >82dB
Noise (22Hz-22KHz): Equivalent input noise -122dBu Remaining output noise <-90dBu
Mono/stereo channel EQ: high frequency +/-15dB, 12KHz low frequency +/-15dB, 80KHz high IF +/-15dB, 2.5KHz
2-track return: RCA lotus seat, unbalanced, 4K ohm, -2dBu
2-track transmission: RCA lotus seat, unbalanced, <75 ohm, -2dBu
L/R output: XLR, balanced, tip hot end, <75 ohm, +4dBu, max +22dBu
FX/AUX output: TRS, unbalanced, tip hot end, <75 ohm, -2dBu, max +18dBu
Headphones: TRS, Tip L, Ring R, Recommended 30 to 600 ohm headphones
Size: 635mm*340mm*37mm

Package includes
1x Professional mixer

16 Channel Professional DJ Studio Live Studio Audio Mixer Sound Console

16 Channel Professional DJ Studio Live Studio Audio Mixer Sound ConsoleBuy Now

DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger

Get DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger Features: 1. Pure copper coil, high permeabillity, low loss, assuring fast charging. 2. Can charge the battery directly. 3. Charging current is around 5V 1A. 4. Can be directly connected to the phone's motherboard, the phone will display wireless charging. 5. Red is positive and gold is negative. The wire can be bent freely. Specification: Material: PCB Product Name: Wireless Charger Receiver Module Input Power: 5V 1A or 9V 0.5A Output: Power up to 5W Charging Efficiency: 75% Transmission distance: 2-8mm Charger Applicable Form: Wireless Charger Executive Standard: Qi Wireless Charging Standard Product Certification: CE/FCC/ROSH Board Size: 1.9 * 3.2cm / 0.7 * 1.3in Copper Coil Size: 4.1 * 2.9cm / 1.6 * 1.4in Cable Length: 5cm / 2.0in Weight: approx. 6g Note: Wireless charging = transmitter + receiver (both can be charged together) 1, there...

24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT

Buy 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Instruction: If music is the food of love, play on. But make sure you use this super little DAC Module to get the best out of your Raspberry audio! The DAC Module provides a super affordable high-quality DAC for the Raspberry. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry's I2S interface on the 2x20 pin GPIO header. Since it's digital audio, it sounds really good, much better than the onboard analog audio. The 3.5mm stereo jack comes soldered onto the board already. Features: 24-bit audio at 192KHz Line out stereo jack pHAT format board Uses the PCM5102A DAC to work with the Raspberry I2S interface Package includes: 1 x DAC digital to analog converter 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Buy Now

433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver

Get 433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver Feature: Remote Control Distance: 100 meter(open/ideal) in theory, 10%-50% in reality(In open environment) Encode: Fixed code, soldering Frequency: 433mHZ Channel: 4 CH Power Supply: DC 12V Relay: DC 12V Quiescent Current: 8mA Work Voltage Range of Relay: AC 110-240V or DC 0-28V Sensitivity:-105 dBm Operating Temperature: -40℃~80℃ Receiver Size: 68x47x17mm Control Mode: 1. Toggle/Self-Lock: Press->On; Press again->Off press one button for one time is working/ON .press the same button again is stop/OFF . (1 channel switch(receiver) need 1 button remote control (transmitter). 2. Latched/Inter-Lock: Press->On; Press other button->Off press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). 3. Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen you...

Anwen Tanner

Search This Blog