Skip to main content

Fingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security Lock

Fingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security Lock
Fingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security LockFingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security LockFingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security Lock


Get Fingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security Lock


Features :

Quality material, wear-resistant, high temperature resistant, corrosion resistant, safe, firm, beautiful.
Multi-function, 5 unlock modes, adapt to 99% of the door, is a smart fingerprint lock for the family.
Touch screen is sensitive, dustproof, waterproof, and has a good touch.
Low battery alarm.
It is used for interior door, wooden door, office door, aluminum alloy door.
 
Specification :

Material: Metal
Color: Black, Red Bronze
Unlock authentication method: fingerprint, password, card, key, APP
Fingerprint sensor type: optical / capacitive
Fingerprint image resolution: 500dpi
Fingerprint image acquisition time: <0.5s
Fingerprint comparison method: 1:N
Fingerprint false rate (FAR): <0.001%
Fingerprint rejection rate (FAR): <0.2%
Fingerprint capacity: 120 pieces
Password capacity: 120 pieces
Swipe capacity: 120
Temporary password capacity: 40 digits
Administrator capacity: 1 (re-enter the administrator password will replace the old password)
Indicates low pressure alarm: <4.8V
Rated voltage: DC6V
Current consumption: peak current <200mA, average standby current <30uA
Power Supply: 4 x AA Battery (not included)
Overall Size: (L)X(W)X(H) 36.5x8x2.5cm /14.37"x3.15"x0.98"(appr.)

Installation Notes:
1.Confirm direction
2. The arrow "⇨" in the square hole of the outer plate points to the direction of the handle
3. Square has 12 holes, No. 1 hole is bolted for 8,9,10 cm door thickness; No. 2 hole is used for 5,6,7 cm door thickness
4. If you want to change the direction: use a small Phillips screwdriver to extend into the square hole, loosen the inner screw, you can pull out the handle; if it is too tight, use a blunt device to gently knock out, replace it with a 180 degree direction and then fix the screw. The same is true for another panel. The arrow"⇨" on the clutch in the outer panel points to the direction of the handle.
 
Package includeds :

2 x Door Lock Panel
2 x Panel Kits
1 x Lock Cylinder
2 x Door Card
2 x Key
1 x Mounting Kits Set
 
Details pictures :














Fingerprint Smart Door Lock Optics Digital Password Touch Anti Theft Security LockSee detail


Popular posts from this blog

DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger

Get DIY Qi Standard Wireless Charging Coil Receiver Module Circuit Board DIY Coil for Phone for Battery 5V 1A Fast Quick Charger Features:   1. Pure copper coil, high permeabillity, low loss, assuring fast charging. 2. Can charge the battery directly. 3. Charging current is around 5V 1A. 4. Can be directly connected to the phone's motherboard, the phone will display wireless charging. 5. Red is positive and gold is negative. The wire can be bent freely.   Specification:   Material: PCB Product Name: Wireless Charger Receiver Module Input Power: 5V 1A or 9V 0.5A Output: Power up to 5W Charging Efficiency: 75% Transmission distance: 2-8mm Charger Applicable Form: Wireless Charger Executive Standard: Qi Wireless Charging Standard Product Certification: CE/FCC/ROSH Board Size: 1.9 * 3.2cm / 0.7 * 1.3in Copper Coil Size: 4.1 * 2.9cm / 1.6 * 1.4in Cable Length: 5cm / 2.0in Weight: approx. 6g   Note:   Wireless charging = transmitter + receiver (both can be charged together) 1, there...
Read more

24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT

Buy 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Instruction: If music is the food of love, play on. But make sure you use this super little DAC Module to get the best out of your Raspberry audio! The DAC Module provides a super affordable high-quality DAC for the Raspberry. Pumping out 24-bits at 192KHz of audio goodness from the Raspberry's I2S interface on the 2x20 pin GPIO header. Since it's digital audio, it sounds really good, much better than the onboard analog audio. The 3.5mm stereo jack comes soldered onto the board already. Features: 24-bit audio at 192KHz Line out stereo jack pHAT format board Uses the PCM5102A DAC to work with the Raspberry I2S interface Package includes: 1 x DAC digital to analog converter 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT Buy Now
Read more

433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver

Get 433MHz 12V 4CH Channel Relay RF Wireless Remote Control Switch 2 Transmitter+Receiver Feature:   Remote Control Distance: 100 meter(open/ideal) in theory, 10%-50% in reality(In open environment) Encode: Fixed code, soldering Frequency: 433mHZ Channel: 4 CH Power Supply: DC 12V Relay: DC 12V Quiescent Current: 8mA Work Voltage Range of Relay: AC 110-240V or DC 0-28V Sensitivity:-105 dBm Operating Temperature: -40℃~80℃ Receiver Size: 68x47x17mm   Control Mode:   1. Toggle/Self-Lock: Press->On; Press again->Off press one button for one time is working/ON .press the same button again is stop/OFF . (1 channel switch(receiver) need 1 button remote control (transmitter). 2. Latched/Inter-Lock: Press->On; Press other button->Off press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter). 3. Momentary/Jog: Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen you...
Read more